Видео

Very appreciative for your sharing! 🎉 just wrapped up and am hoping for the best. Tested it and so far, so good! Thanks a million!

Finally finished! U saved my pockets big time bro! Also…. Mine was also very shameful once I took it all apart. 😂 pure shame. Nonetheless my dryer is up and working thank to you My man!!!

I'm pretty sure your water is at zero.. when you add the pac that adds minerals back into the water you're normally will have a 20 to 25 TDS meter reading don't forget to take your water tested to check what chemicals are in it

Bout to do this, seems like hell but I’ll get through it

looks like the species you found was Big Berry Manzanita, that one has very sticky fruits

Great job. Thanks for u time

How to fix red light Red light blinking

Whats the name of that blue device you tested the water with.

I bet that the PID will have melted down by now...?

Try a blow torch. heat cool heat cool and so on

@8:23 There's a massive fart.

Good idea! Thanks! I have a broken patio table and a sheet of warped plywood in the back yard!

Thank you for this. I'll stick to aluminum casting with pla.😊

Anybody remember the 1981 movie Dragonslayer? This really looks like the magical spear from that one.

This water filtration system initially worked so well that I purchased a second one. However, when it was time to replace the filters, the system stopped working. It was a headache trying to get customer care to return my calls and figure out the problem. The system was bypassing the filtration process, resulting in no filtered water. After over a month of struggling with this issue and receiving minimal support from customer care, I finally gave up and replaced the entire system with a different brand. I was very disappointed with the lack of support from Express Water and probably won't be buying from them again, as I expect a company to back up their product when customers need assistance.

Think you didn’t run the vacuum long enough before pouring

I am trying to 3d print with wax resin currently. What trouble shooting worked out for u ? Your prints look amazing.

When all said and done it’s worth your money to just buy a purpose built burnout oven.

Excellent, but i think if you put in the right side of cabinet you have a plenty acces to gauge and UV lamp when time is come to replace it.....IMO

What was the air pressure that you used first

Thanks

Sera que da para Fazer grillz desse jeito??

Thank you. Good video. Appreciate the details about LG steam dryer. Wiring & parts seem essentially identical though obviously a different model. Hope you do more videos on electro mechanical fixes & upgrades, like installing water purification, upgrading sockets to include usb, led light fixture, upgrades, etc. or whatever your trained or exoerience or professional skill set is. We did miss how you installed back rollers, etc., but will find out today. We LUCKED OUT that lint accumulation near ELECTRIC HEATER DID NOT START FIRE, as lint accumulation was so great that it wrapped around & felted around one roller so severely that it broke. (Definitely loose & broke tetaining clip.) All 3 other rollers were ok but were also wrapped with only a litlle lint & clips intact. We clean lint trap after each use & vents annually & outside vent with animal guard monthy. (Should make vacumn nozzle that can reach down to bottom of dryer trap lint catchment as can see lint down there.) Dryer is about 14 years old. First time that we've opened it. Shocked by how much lint accumulated. HOW DOES SO MUCH LINT GET INSIDE DRYER. WHERE IS THE LINT LEAK???? Front panel, blower, etc. Heard it could be the drum that leaks lint, especially if vent clogged. LG Dryers need to be easier to open to inspect & clean lint & be part of periodic maintenance schedule. Disassembled & cleaned everything thus far but the motor which was just vacumned. (Did remove hair wrapped around motor spindle to blower.) Great dryer! Hope it is good for another 15 years with periodic internal inspections for lint!

So we finally discover where all the 10mm stuff goes.

21 ppb is not good. Drinking water should be less than 5 to 0 ppb from a filtration system. Either this system is not working or ready to drink.

where the front and back rollers the same?

Is it made in US

... To be continued...

Good job man. Protect your family.

I wish my city water was that good I'm sitting in 390-450 tds it's crazy

Do you have a video on how to change the rom alk pac n uv light

Did the installation affect the water pressure to you sink?

Hello, saw ur previous video now this and did installed model that comes with UV+ALK and was wondering if ION filter is it really required even if you have UV or ALK? Thanks.

The filter housing should be vacuum cleaned every year to help with the build up of lint.

i need specially designed metal tools made at work and there's no way they would go for a 150k+ metal printer when its not used for production. its only to support the assemblers. i was hoping you would review the 17-4 filament as the bronze & copper is practically useless for absolutely everything. also they sell inline filament heaters now that's suppose to help with the breakage.

Too much talk and too much still picture IMO. I was hoping to see a lot of cast results too.

Hi. I'm the Founder/ceo of The Virtual Foundry. Your first review was helpful for us. Your followup was also helpful. It's been quite a few years since your last review. I've put years worth of effort into make this process easier. Our newest instructions for sintering bronze and copper have a 95%+ success rate. Also, the filament is MUCH easier to work with (it's not brittle). Anyway, if your up for reviewing the newest version, please reach out. I'll set you up with an evaluation kit free of charge. No strings attached, of course. I'd expect you to present your honest opinion. The process has become so refined and simple that I'm confident you will wind up with a really nice metal 3d print. Please reach out if you're interested.

I appreciate it Sir.

Do yall think it taste like coconut

So the filter only works for the faucet given and not on the main house faucet?

The drain saddle package doesnt fit the pipe any thoughts????

Best do that extra gently. I would use walnut shell instead of sand. Next burn it in the oven or a wood fire.

I normaly build a good wood fire then throw it in the coals after the logs burn down to coals.

Nice and straightforward explanation, thank you

The original piece was hollow all trough until the tip, to save weight. Isn't 12% tin a bit much ? what about a 9/10% tin ? It would be much tougher

Thank you so much for the great video! It helped me a lot!

If you guys see how I used to do it back in Cuba which is a communist country, Im talking about third world shit, I used to put the flask, which was just a copper pipe cut, on top of just and electric furnace with an aluminum pot on top, for 5 hours straight, and then cast in a centrifugal casting 😂

Any recomendations on where to look to get my points on the bed? Ive looked and looked but everything i find is older and it doesnt match with the newer software....

You should add more meta data. Regular/hash tags. Make shorts and link the original video. Just give TY what they want! So they can best recommend your videos. Check out the "remix" button on your videos page from your phone. Top right corner you can change from 5/60sec. You can also upload from your phone and covert/edit into a short. Tags are so important I believe. More important than a nice description which is just word vomit. Tags narrow down what words matter. Also have the same words you tag also in your description.

Water sucks. Gatorades better.